Triflex ProDrain - technical details

Triflex ProDrain: balcony ancillary system for damp substrates

Triflex ProDrain saves time and money compared to conventional refurbishment solutions. With Triflex ProDrain, there is generally no need to remove existing coverings, thus reducing the amount of dust and rubble produced. And because there’s no demolition or slow-drying screed involved, there’s no noise, dust or the long wait residents would otherwise have to put up with.

Closure times with the quick-lay Triflex DC-Mat decoupling membrane and the following Triflex BTS-P waterproofing system are between 1 and 2 days,  a fraction of the usual 5 to 6 weeks.

Planning documents

System build-up Triflex ProDrain

1

Primer

Triflex ProDrain Primer

Triflex ProDrain Primer

Triflex ProDrain Primer is used as a quick-filming and moisture-resistant primer on absorbent substrates such as concrete or screed in conjunction with the Triflex ProDrain system.

Consumption
Approx. 0.15 l/m²
2

Adhesive

Triflex ProDrain Fix+

Produktbild ProDrain Fix+ 25kg

Triflex ProDrain Fix+ is used to bond the Triflex Uncoupling Membrane DC-Mat to the Triflex ProDrain system.

Consumption
Min. 4.50 kg/m²
3

Uncoupling

Triflex Uncoupling Membrane DC-Mat

Entkopplungsbahn DC-Mat 1x5 m

Triflex Uncoupling Membrane DC-Mat is used in the Triflex ProDrain system.

Consumption
/
4

Load distribution

Triflex Cryl Primer 276

Triflex Cryl Primer 276

Triflex Cryl Primer 276 is used as a primer on absorbent substrates, such as concrete or screed, for Triflex systems with a PMMA base.

Consumption
Min. 0.40 kg/m² on a smooth, even surface (Load distribution in the Triflex ProDrain system: minimum 1.10 kg/m² )
5

Triflex BTS-P waterproofing system

Triflex Cryl Finish 205

Triflex Cryl Finish 205

Triflex Cryl Finish 205 is used as a finish on dressed and undressed Triflex PMMA systems to increase chemical and mechanical resistance.

Consumption
Approx. 0.50 to 0.70 kg/m² on a smooth, even surface depending on area of use.

Triflex Cryl Primer 222

Triflex Cryl Primer 222

Triflex Cryl Primer 222 is used as a primer on asphalt for Triflex systems with a PMMA resin base.

Consumption
Min. 0.40 kg/m² on a smooth, even surface

Triflex Cryl Primer 276

Triflex Cryl Primer 276

Triflex Cryl Primer 276 is used as a primer on absorbent substrates, such as concrete or screed, for Triflex systems with a PMMA base.

Consumption
Min. 0.40 kg/m² on a smooth, even surface (Load distribution in the Triflex ProDrain system: minimum 1.10 kg/m² )

Triflex Glass Primer

Triflex Glas Primer

Triflex Glass Primer is used as a primer on unpolished glass substrates under various Triflex systems.

Consumption
Approx. 0.05 l/m² (50 ml) on a smooth, even surface
Product information

Triflex Metal Primer

Triflex Metal Primer

Triflex Metal Primer is used as a primer on various metals and rusty substrates.

Consumption
Approx. 0.15 l/m²
Product information

Triflex Pox R 100

Triflex Pox R 100

Triflex Pox R 100 is used as a primer and for the production of:

  • Scraper fillers
  • Thin-layer mortar coverings
  • Thick-layer mortar coverings
  • Repair mortar
Consumption
Disposable primer: min. 0.30 kg/m² on smooth, level surface
Product information

Triflex ProDetail

Triflex ProDetail

Triflex ProDetail is used for details on flat roofs, balconies, terraces and covered walks as well as parking decks.

Consumption
Min. 3.00kg/m² on a smooth, even surface
Product information

Triflex Special Fleece

Triflex Spezialvlies

Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.

Consumption
/
Product information

Triflex ProFloor

Triflex ProFloor

Triflex ProFloor is used as a high-quality and durable coating for heavy-duty surfaces in the Triflex BTS-P, Triflex BFS and Triflex TSS balcony systems.

Consumption
Min. 4.00kg/m² on a smooth, even surface
Product information

Triflex Cryl Finish S1

Triflex Cryl Finish S1

Triflex Cryl Finish S1 is used as a finish on Triflex BTS-P (S1), Triflex BFS (S1) and Triflex TSS (S1) systems.

Consumption
Approx. 0.50 to 0.70 kg/m² on a smooth, even surface depending on area of use.
Product information

Triflex Micro Chips

Triflex Micro Chips

Triflex Micro Chips are used for applying “Chips Design” surface designs with Triflex systems. They are a decorative dressing material with an acrylate copolymer base.

Consumption
The volume is at least 0.05 kg/m², on a smooth, even surface, depending on how densely the chips are applied
Product information

Triflex Colour Mix

Triflex Colour Mix is used for the surface treatment of Triflex systems.

Consumption
The volume is at least 0.05kg/m², on a smooth, even surface, depending on how densely the chips are applied
Product information

Triflex ProTerra

Triflex ProTerra

Triflex ProTerra is a high-quality and durable surface waterproofing product for use on balconies, terraces and covered walks in both new buildings and refurbishments. Triflex ProTerra can be used with the Triflex BTS-P, Triflex BWS and Triflex Stone Design systems.

Consumption
Min. 3.00kg/m² on a smooth, even surface
Product information

Quartz sand 0.7-1.2 mm

Hartkorn grob

Details can be found in the planning documents.

Quarzsand 0,2-0,6 mm

Hartkorn grob

Detailinformationen sind den Planungsunterlagen zu entnehmen.

6

Other/optional system components

Triflex Metal Primer

Triflex Metal Primer

Triflex Metal Primer is used as a primer on various metals and rusty substrates.

Consumption
Approx. 0.15 l/m²
Product information

Triflex ProDetail

Triflex ProDetail

Triflex ProDetail is used for details on flat roofs, balconies, terraces and covered walks as well as parking decks.

Consumption
Min. 3.00kg/m² on a smooth, even surface
Product information

Triflex Special Fleece

Triflex Spezialvlies

Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.

Consumption
/
Product information

Triflex Cryl Paste

Triflex Cryl Spachtel

Triflex Cryl Paste is used to level out any unevenness in the substrate and any fleece overlaps or depressions in Triflex systems.

Consumption
Approx. 1.40 kg/m² per mm thickness on a smooth even surface.
Product information

Triflex Cleaner

Triflex Reiniger

Triflex Cleaner is used with all Triflex PMMA, EP, PU and PUA products. It is used to pre-treat substrates and to degrease metal when overcoating or if work is interrupted. In addition, soiled tools can be cleaned with Triflex Cleaner.

Consumption
Depending on the degree of soiling and the substrate (at least 0.20l/m²)
Product information

Triflex Balcony Edge Finishing Profile

Balkon Abschlussprofil

Edge profile

Consumption
/

Our Triflex BTS-P waterproofing system in detail.

More

Specifications & System drawings

System drawings

Application steps

Prepare substrate and roughen tiles. Remove any loose material and level out any unevenness. Prime mineral surfaces with Triflex ProDrain Primer, or at least prewet the surfaces so that they are matt damp.
1/8
Mix the adhesive.
2/8
Apply the Triflex ProDrain Fix+ adhesive in two layers.
3/8
Triflex ProDrain 04.
Cut The Triflex DC-Mat to size and apply it to the surface.
4/8
Triflex ProDrain 05
Affix the membrane using a pressure roller over the entire surface.
5/8
Triflex ProDrain 06
Priming with Triflex Primer.
6/8
Triflex ProDrain 07
For ventilation via leading edge, affix eaves flashings with Triflex Cryl Paste.
7/8
Triflex ProDrain 08
Seal wall junctions and details with Triflex ProDetail. The Triflex BTS-P balcony waterproofing system can then be installed.
8/8
Instructions for use

Exceptional quality. Exceptional conformity.

Triflex products give you complete peace of mind whatever the application. We regard continuous internal and external quality controls in production and extensive field tests prior to market launch as essential.

Tests and certificates

References

Thumbnail
Balconies in an apartment building in Kranichdamm 35-41, Salzgitter
Thumbnail
Lavaterhof Hanover apartment house walkways
Thumbnail
Terrace, staircases and platforms at the Berlin Cathedral, Berlin
Thumbnail
Balcony refurbishment in Gustav-Mahler-Weg 1-9 Baldham
Thumbnail
High-rise building at the Ratingen ring kiln
Thumbnail
Restoration of the façade of the Grand Hotel National Lucerne (CH)
Thumbnail
Sparrenberg Castle Bielefeld castle keep
Thumbnail
Apartment building in Pillauer Weg Kaarst
Thumbnail
Nursery Waldemar Berlin

How may we help you?

We are here to help. Why not give us a call if you have any questions about our products and system solutions.