Two-component, pigmented casting compound based on polymethyl methacrylate (PMMA) resin.
Loading content
Triflex FlexFiller
Triflex FlexFiller is used for filling joints.
It is a pourable joint filler for wide joints and cracks starting at 10 mm. The material can be applied reliably even at low temperatures down to 0 °C and is fully load-bearing after just 3 hours. Thanks to its primer-free application, Triflex FlexFiller enables fast and efficient application, making it ideal for renovation and repair work.
Benefits at a Glance
Suitable for filling wide joints/cracks (10 mm and wider)
Can be applied even in winter (down to 0 °C)
Fully load-bearing after 1 hour
No primer required
Quick and easy to use in just 4 steps
1
The construction joint must be clean and dry.
2
Mix the resin and catalyst, then transfer the mixture to another container.
3
If necessary, line the joint with PE round cord and fill it with sealant.