Triflex BWS

Find out more

Triflex BWS waterproofing system under other coverings

Triflex BWS is the mechanically strong waterproofing system for underneath other loose and fixed coverings such as tiles or paving. Since the waterproofing system is permanently resistant to alkalis and hydrolysis, it is even possible to apply mineral-based coverings or tile adhesives on top of BWS. Triflex BWS is full-surface fleece-reinforced and absorbs structural movement without any problem. 

     Your benefits at a glance

  • Alkali- and hydrolysis-resistant: even mineral-based coverings or tile adhesives can be used in direct contact with the waterproofing
  • Surface finishes: the Triflex BWS system can be dressed with a variety of other loose or fixed coverings
  • Can also be applied in low temperatures: the waterproofing system can be applied in substrate temperatures of down to 0°C
  • Short closure periods: Triflex BWS offers faster curing times than systems made of EP or PUR
  • Waterproof down to the smallest detail: even complex details, such as upstands, can be easily and homogenously waterproofed using liquid applied technology
  • Highly resilient with dynamic crack-bridging through full-surface fleece-reinforcement

Technical information

Triflex BWS

The high-quality Triflex BWS system can handle all waterproofing challenges for other coverings including wood, tiles and slabs. The waterproofing system impresses both due to its robustness and its low build-up of just a few millimetres. It can be used under loosely laid wooden panels, heavy slabs and firmly adhered tiles to offer safe and long-lasting protection.
View technical details