?

Triflex ProJoint technical details

Triflex ProJoint - technical details

Triflex ProJoint: waterproofing system for expansion joints

Liquid-applied joint waterproofing is flexible and moulds to the contours of the joint. Thus, not only straight joints, but also difficult constructions, can be reliably and seamlessly waterproofed. Even height differences can be surmounted. Different joint widths can be waterproofed with the same system. The thin set-up of the liquid-applied waterproofing facilitates a smooth transition from joint to surface with minimal milling of the substrate. Rainwater cannot seep in, as the material adheres to the entire surface. Nor can roots and rhizomes penetrate into the normally sensitive interfaces.

ProJoint system build-up

Thumbnail
1

Primer

Triflex Cryl Primer 222

Triflex Cryl Primer 222

Triflex Cryl Primer 222 is used as a primer on asphalt for Triflex systems with a PMMA resin base.

Consumption
Min. 0.40 kg/m² on a smooth, even surface

Triflex Glass Primer

Triflex Glas Primer

Triflex Glass Primer is used as a primer on unpolished glass substrates under various Triflex systems.

Consumption
Approx. 0.05 l/m² (50 ml) on a smooth, even surface
Product information

Triflex Metal Primer

Triflex Metal Primer

Triflex Metal Primer is used as a primer on various metals and rusty substrates.

Consumption
Approx. 0.08 to 0.10 l/m²
Product information

Triflex Cryl Primer 287

Triflex Cryl Primer 287

Triflex Cryl Primer 287 is used as a primer on absorbent substrates such as concrete, screed or wood for Triflex systems with a PMMA resin base.

Consumption
Min. 0.35 kg/m² on a smooth, even surface

Triflex Pox Primer 116+

Triflex Pox Primer 116+

Triflex Pox Primer 116+ is used as a primer, a filling primer and a roughness depth levelling material, primarily in the Triflex CPS-C+ and Triflex CPS-I+ systems.

Consumption
The volume depends on the system being used
2

Support strip

Triflex Cryl Paste

Triflex Cryl Spachtel

Triflex Cryl Paste is used to level out any unevenness in the substrate and any fleece overlaps or depressions in Triflex systems.

Consumption
Approx. 1.40 kg/m² per mm thickness on a smooth even surface.

Triflex Support Strip

Triflex Trägerband

Triflex Support Strip is used as a support layer for the creation of a loop in settlement joints.

Consumption
/
3

Joint waterproofing

Triflex ProDetail

Triflex ProDetail

Triflex ProDetail is used for details on flat roofs, balconies, terraces and covered walks as well as parking decks.

Consumption
Min. 3.00kg/m² on a smooth, even surface

Triflex Special Fleece

Triflex Spezialvlies

Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.

Consumption
/
4

PE round sealing band

PE round sealing band

Details can be found in the planning documents.

5

Edge protection

Triflex Cryl Paste

Triflex Cryl Spachtel

Triflex Cryl Paste is used to level out any unevenness in the substrate and any fleece overlaps or depressions in Triflex systems.

Consumption
Approx. 1.40 kg/m² per mm thickness on a smooth even surface.

Triflex Pox Primer 116+

Triflex Pox Primer 116+

Triflex Pox Primer 116+ is used as a primer, a filling primer and a roughness depth levelling material, primarily in the Triflex CPS-C+ and Triflex CPS-I+ systems.

Consumption
The volume depends on the system being used

Triflex Cleaner

Triflex Reiniger

Triflex Cleaner is used with all Triflex PMMA, EP, PU and PUA products. It is used to pre-treat substrates and to degrease metal when overcoating or if work is interrupted. In addition, soiled tools can be cleaned with Triflex Cleaner.

Consumption
Depending on the degree of soiling and the substrate (at least 0.20l/m²)
Product information

High performance anchors

High-performance anchors, e.g. Fischer FH 12/50 SK

Edge protection

Detailed information can be found in the planning documents.

6

Joint sealant

Triflex FlexFiller

Triflex FlexFiller

Triflex FlexFiller is used in the sealing of joints.

Consumption
Approx. 1.40kg/m² per mm thickness on a smooth even surface.
Product information

Instructions for use

Thumbnail
The substrate is milled and then ground or shot-blasted.
1/9
Thumbnail
Concrete substrates are primed with Triflex Cryl Primer 287.
2/9
Thumbnail
After the support strip is affixed with Triflex Cryl Paste, …
3/9
Thumbnail
… the joint is waterproofed with double fleece reinforcement and …
4/9
Thumbnail
… three coats of Triflex ProDetail.
5/9
Thumbnail
The waterproofing can be recoated after approx. one hour.
6/9
Thumbnail
Then the stainless steel profiles are affixed with Triflex Cryl Paste …
7/9
Thumbnail
... and mechanically secured with high-performance anchors.
8/9
Thumbnail
Triflex FlexFiller prevents soiling of the maintenance joint.
9/9

Triflex products give you complete peace of mind whatever the application. We regard continuous
internal and external quality controls in production and extensive field tests prior to market launch as essential.

Tests and certificates

References

Thumbnail
Kurt-Schumacher-Ring Salzgitter multi-storey car park
Thumbnail
Access ramps and delivery area of the administration building of the VHV Group Hanover
Thumbnail
Telekom Traunstein underground car park
Thumbnail
Town hall multi-storey car park Kaufbeuren
Thumbnail
Aalen Town Hall multi-storey car park ramp
Thumbnail
Evangelical Hospital Bethel (EvKB) Kantensiek multi-storey car park
Thumbnail
“Kaufhaus des Westens” Berlin ramps in multi-storey car park 1
Thumbnail
Weimarer Straße Wolfsburg multi-storey car park
Thumbnail
Spindlers Hof Berlin underground car park and ramps

How may we help you?

We are here to help. Why not give us a call if you have any questions about our products and system solutions.