?

Preco Cryl Profile Plastic 2K

Preco Cryl Profile Plastic 2K is used as a type I or type II profiled marking to generate acoustic and haptic signals when a vehicle drives over the line.

Preco Cryl Profilplastik 2K

Preco Cryl Profile Plastic 2K is particularly important to use in danger areas such as hard shoulder markings on motorways or solid lines in areas with narrow bends. The product is used as a type II marking with a profiled surface. Depending on the spacing set between the profiles, a haptic and acoustic signal is generated when a vehicle drives over the line. Experts believe that fatigue is the cause of a quarter of all road accidents, making it the most common known cause of accidents. 


Road and motorway markings with Preco Cryl Profile Plastic 2K draw the attention of lorry and car drivers to any deviation from their lane. For the application of profiled markings, an appropriate special unit for conventional cold plastic marking machines is all that is required.

  • Marking of danger areas
  • Creation of type I and type II profiled markings
Preco Cryl Profilplastik 2K

System set-up

  1. Triflex Than Primer L 1K – for sealing the concrete substrate and ensuring substrate adhesion
  2. Preco Cryl Profile Plastic 2K – for closed-textured, agglomerate and profiled marking
  3. Drop-on materials mix – according to the relevant BASt test certificate

Material consumption

Preco Cryl Profile Plastic 2K, density approx. 1.9 g/cm³

Profiled marking Required volume approx. 7.00 kg/m² with a layer thickness of 2.0 mm basic line and 5 mm profile. Volume required in relation to a 1 km continuous line.

Colours

  • 9010 White

How may we help you?

We are here to help. Why not give us a call if you have any questions about our products and system solutions.