Preco Line 300 NightLine is used as a single-component, thin-film marking with photoluminescent properties on asphalt and concrete surfaces. The marking has been tested in accordance with DIN 67510 Part 1, Class A (see BAM Report: VIII.1E2046, Sample Plate No. 1). With a layer thickness of 0.6 mm, the BAM measured the following decay time: up to a luminance of 0.3 mcd/m² = 600 minutes! This means the marking remains visible to the human eye for at least one hour.
Preco Line 300 NightLine is used indoors as a safe supplement to existing emergency lighting systems for marking escape and rescue routes subject to low mechanical stress in locations such as stairwells, underground parking garages, factories, shopping centers, and tunnels.
The high-quality pigments contained in Preco Line 300 NightLine store daylight or artificial light and gradually release it in the dark. The effectiveness of the photoluminescent marking depends, among other factors, on the amount of light it receives. Generally, the illuminance level of general lighting is sufficient. However, care must be taken to ensure that the light sources are installed as close as possible to the safety markings.
