Loading content
Long-lasting two-component marking paint for parking lots and parking spaces
Clear and permanently visible markings provide guidance and safety in parking areas. Triflex ParkLine is a low-solvent, two-component, high-solid epoxy-based marking paint for outdoor parking and parking spaces. It is suitable for asphalt and concrete and offers short drying times, high abrasion resistance, and resistance to shear forces, oil, gasoline, and UV radiation. This results in durable parking lot markings with a professional appearance and minimal closure times.
- Quickly ready for use Walkable after about 2 hours and ready for traffic after about 4 hours at +20 °C.
- Durable Abrasion-resistant, shear-force-resistant, and resistant to oil, gasoline, and UV radiation.
- Flexible to apply Suitable for asphalt and concrete, as well as for application by spraying or rolling.
Looking for markings for indoor areas?
Our Preco Line EP 2K is available for traffic routes, parking and loading areas, as well as hazard zones in production and warehouse facilities.
System Architecture
1Triflex Than Primer L 1K
... to seal the concrete substrate and ensure adhesion to the substrate
2Triflex ParkLine
... continuous line markings with layer thicknesses ranging from 0.3 to 0.6 mm
Material Consumption
Triflex ParkLine, density approx. 1.49 g/cm³.
Coverage: approx. 0.90 kg/m² at a layer thickness of 0.6 mm.
Determining the dry film thickness:
Wet film thickness | 300 μm | 400 μm | 600 μm |
Dry film thickness | 160 μm | 215 μm | 320 μm |
Calculation formula: Line width (m) × Line length (m) × Coverage (kg/m²) = Total coverage (kg)