?

Triflex Crack Dressing Technical Details

Triflex Crack Dressing: Quick partial refurbishment for low budgets

In addition to mechanical loads as a result of multi-storey car park traffic, thermal and dynamic movements also place heavy demands on multi-storey car park structures. The OS 8 surface protection that is mostly used for cost reasons often fails to meet these demands on a long-term basis. This results in the formation of cracks. The ingress of moisture and de-icing salts can then lead to corrosion, which can endanger the structural stability of the building over the long-term.

The Triflex Crack Dressing system is a cost-effective alternative to the full-surface refurbishment of damaged foundation slabs. The dressing can be applied as a long-lasting solution with surface-level mounting and filled stop cuts, or alternatively as a surface construction, in both cases with an abrasion-resistant wearing layer. The fleece-reinforced waterproofing system is also suitable for use as a temporary solution for the quick repair of the structure. Refurbished surfaces can be driven on again after just a few hours.

The partial waterproofing system Triflex Crack Dressing has a General Building Supervisory Authority Test Certificate (abP) and is classified to OS 10 of the Repair Guideline (RiLi-SIB).

System set-up Triflex Crack Dressing version 1

Thumbnail
1

Primer (version 1)

Triflex Cryl Primer 222

Triflex Cryl Primer 222

Triflex Cryl Primer 222 is used as a primer on asphalt for Triflex systems with a PMMA resin base.

Consumption
Min. 0.40 kg/m² on a smooth, even surface
Product information

Triflex Metal Primer

Triflex Metal Primer

Triflex Metal Primer is used as a primer on various metals and rusty substrates.

Consumption
Approx. 0.08 to 0.10 l/m²
Product information

Triflex Cryl Primer 287

Triflex Cryl Primer 287

Triflex Cryl Primer 287 is used as a primer on absorbent substrates such as concrete, screed or wood for Triflex systems with a PMMA resin base.

Consumption
Min. 0.35 kg/m² on a smooth, even surface
Product information

Triflex Pox Primer 116+

Triflex Pox Primer 116+

Triflex Pox Primer 116+ is used as a primer, a filling primer and a roughness depth levelling material, primarily in the Triflex CPS-C+ and Triflex CPS-I+ systems.

Consumption
The volume depends on the system being used
Product information
2

Waterproofing (version 1)

Triflex Special Fleece

Triflex Spezialvlies

Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.

Consumption
/
Product information

Triflex ProPark

Triflex ProPark

Triflex ProPark is used in the systems Triflex ProPark und Triflex AWS. It is a high-quality and durable fleece-reinforced surface waterproofing product for use in both new buildings and refurbishments.

Consumption
Min. 3.00 kg/m² on a smooth, even surface
Product information
3

Wearing layer (version 1)

Triflex Cryl M 264

Triflex Cryl M 264

Triflex Cryl M 264 is used in the Triflex ProPark and Triflex DeckFloor systems as a non-slip coating in ramp and entrance areas on parking decks subject to extremely heavy mechanical loads.

Consumption
Min. 4.00kg/m² on a smooth, even surface
Product information
4

Other/optional system components (version 1)

Triflex Cryl RS 240

Triflex Cryl RS 240

Triflex Cryl RS 240 is a fast-curing, heavy-duty repair mortar for repairs to screeds and improvement work in exterior areas for thicknesses of 5 mm to 50 mm.

Consumption
Approx. 2.20 kg/m² per mm thickness on a smooth even surface.
Product information

Triflex Cryl Paste

Triflex Cryl Spachtel

Triflex Cryl Paste is used to level out any unevenness in the substrate and any fleece overlaps or depressions in Triflex systems.

Consumption
Approx. 1.40 kg/m² per mm thickness on a smooth even surface.
Product information

Triflex Cryl RS 242

Triflex Cryl RS 242

Triflex Cryl RS 242 is used for repairing and levelling work on asphalt coverings with layer thicknesses of 5 to 50 mm.

Consumption
Approx. 2.20kg/m² per mm thickness on a smooth even surface.
Product information

Triflex DeckFloor

Triflex DeckFloor

Triflex DeckFloor is used as a high-quality, durable coating for heavy-duty surfaces in the parking deck systems Triflex ProPark and Triflex DeckFloor. Triflex DeckFloor can also be used to produce scratch and levelling coats in multi-storey car parks.

Consumption
Min. 4.00 kg/m² on a smooth, even surface
Product information

Triflex Cleaner

Triflex Reiniger

Triflex Cleaner is used with all Triflex PMMA, EP, PU and PUA products. It is used to pre-treat substrates and to degrease metal when overcoating or if work is interrupted. In addition, soiled tools can be cleaned with Triflex Cleaner.

Consumption
Depending on the degree of soiling and the substrate (at least 0.20l/m²)
Product information

Triflex Liquid Thixo

Triflex Stellmittel flüssig

Triflex Liquid Thixo is used as a thickening agent in Triflex PMMA products to allow the coating of vertical surfaces. It is not suitable for EP or PUR products.

Consumption
Amount to be added up to 1% by weight.
Product information

Triflex UltraCleaner

Triflex UltraCleaner

Triflex UltraCleaner is used as a universal cleaning and degreasing agent for treating Triflex surfaces.

Consumption
Depending on the degree of soiling and the substrate
Product information

System set-up Triflex Crack Dressing version 2

Thumbnail
1

Primer (version 2)

Triflex Cryl Primer 222

Triflex Cryl Primer 222

Triflex Cryl Primer 222 is used as a primer on asphalt for Triflex systems with a PMMA resin base.

Consumption
Min. 0.40 kg/m² on a smooth, even surface
Product information

Triflex Metal Primer

Triflex Metal Primer

Triflex Metal Primer is used as a primer on various metals and rusty substrates.

Consumption
Approx. 0.08 to 0.10 l/m²
Product information

Triflex Cryl Primer 287

Triflex Cryl Primer 287

Triflex Cryl Primer 287 is used as a primer on absorbent substrates such as concrete, screed or wood for Triflex systems with a PMMA resin base.

Consumption
Min. 0.35 kg/m² on a smooth, even surface
Product information

Triflex Pox Primer 116+

Triflex Pox Primer 116+

Triflex Pox Primer 116+ is used as a primer, a filling primer and a roughness depth levelling material, primarily in the Triflex CPS-C+ and Triflex CPS-I+ systems.

Consumption
The volume depends on the system being used
Product information
2

Waterproofing (version 2)

Triflex Special Fleece

Triflex Spezialvlies

Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.

Consumption
/
Product information

Triflex ProPark

Triflex ProPark

Triflex ProPark is used in the systems Triflex ProPark und Triflex AWS. It is a high-quality and durable fleece-reinforced surface waterproofing product for use in both new buildings and refurbishments.

Consumption
Min. 3.00 kg/m² on a smooth, even surface
Product information
3

Wearing layer (version 2)

Triflex Cryl M 264

Triflex Cryl M 264

Triflex Cryl M 264 is used in the Triflex ProPark and Triflex DeckFloor systems as a non-slip coating in ramp and entrance areas on parking decks subject to extremely heavy mechanical loads.

Consumption
Min. 4.00kg/m² on a smooth, even surface
Product information
4

Other/optional system components (version 2)

Triflex Cryl RS 240

Triflex Cryl RS 240

Triflex Cryl RS 240 is a fast-curing, heavy-duty repair mortar for repairs to screeds and improvement work in exterior areas for thicknesses of 5 mm to 50 mm.

Consumption
Approx. 2.20 kg/m² per mm thickness on a smooth even surface.
Product information

Triflex Cryl Paste

Triflex Cryl Spachtel

Triflex Cryl Paste is used to level out any unevenness in the substrate and any fleece overlaps or depressions in Triflex systems.

Consumption
Approx. 1.40 kg/m² per mm thickness on a smooth even surface.
Product information

Triflex Cryl RS 242

Triflex Cryl RS 242

Triflex Cryl RS 242 is used for repairing and levelling work on asphalt coverings with layer thicknesses of 5 to 50 mm.

Consumption
Approx. 2.20kg/m² per mm thickness on a smooth even surface.
Product information

Triflex DeckFloor

Triflex DeckFloor

Triflex DeckFloor is used as a high-quality, durable coating for heavy-duty surfaces in the parking deck systems Triflex ProPark and Triflex DeckFloor. Triflex DeckFloor can also be used to produce scratch and levelling coats in multi-storey car parks.

Consumption
Min. 4.00 kg/m² on a smooth, even surface
Product information

Triflex Cleaner

Triflex Reiniger

Triflex Cleaner is used with all Triflex PMMA, EP, PU and PUA products. It is used to pre-treat substrates and to degrease metal when overcoating or if work is interrupted. In addition, soiled tools can be cleaned with Triflex Cleaner.

Consumption
Depending on the degree of soiling and the substrate (at least 0.20l/m²)
Product information

Triflex Liquid Thixo

Triflex Stellmittel flüssig

Triflex Liquid Thixo is used as a thickening agent in Triflex PMMA products to allow the coating of vertical surfaces. It is not suitable for EP or PUR products.

Consumption
Amount to be added up to 1% by weight.
Product information

Triflex UltraCleaner

Triflex UltraCleaner

Triflex UltraCleaner is used as a universal cleaning and degreasing agent for treating Triflex surfaces.

Consumption
Depending on the degree of soiling and the substrate
Product information

System set-up Triflex Crack Dressing version 3

Thumbnail
1

Waterproofing (version 3)

Triflex Special Fleece

Triflex Spezialvlies

Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.

Consumption
/
Product information

Triflex ProPark

Triflex ProPark

Triflex ProPark is used in the systems Triflex ProPark und Triflex AWS. It is a high-quality and durable fleece-reinforced surface waterproofing product for use in both new buildings and refurbishments.

Consumption
Min. 3.00 kg/m² on a smooth, even surface
Product information
2

Other/optional system components (version 3)

Triflex Cryl RS 240

Triflex Cryl RS 240

Triflex Cryl RS 240 is a fast-curing, heavy-duty repair mortar for repairs to screeds and improvement work in exterior areas for thicknesses of 5 mm to 50 mm.

Consumption
Approx. 2.20 kg/m² per mm thickness on a smooth even surface.
Product information

Triflex Cryl Paste

Triflex Cryl Spachtel

Triflex Cryl Paste is used to level out any unevenness in the substrate and any fleece overlaps or depressions in Triflex systems.

Consumption
Approx. 1.40 kg/m² per mm thickness on a smooth even surface.
Product information

Triflex Cryl RS 242

Triflex Cryl RS 242

Triflex Cryl RS 242 is used for repairing and levelling work on asphalt coverings with layer thicknesses of 5 to 50 mm.

Consumption
Approx. 2.20kg/m² per mm thickness on a smooth even surface.
Product information

Triflex DeckFloor

Triflex DeckFloor

Triflex DeckFloor is used as a high-quality, durable coating for heavy-duty surfaces in the parking deck systems Triflex ProPark and Triflex DeckFloor. Triflex DeckFloor can also be used to produce scratch and levelling coats in multi-storey car parks.

Consumption
Min. 4.00 kg/m² on a smooth, even surface
Product information

Triflex Cleaner

Triflex Reiniger

Triflex Cleaner is used with all Triflex PMMA, EP, PU and PUA products. It is used to pre-treat substrates and to degrease metal when overcoating or if work is interrupted. In addition, soiled tools can be cleaned with Triflex Cleaner.

Consumption
Depending on the degree of soiling and the substrate (at least 0.20l/m²)
Product information

Triflex Liquid Thixo

Triflex Stellmittel flüssig

Triflex Liquid Thixo is used as a thickening agent in Triflex PMMA products to allow the coating of vertical surfaces. It is not suitable for EP or PUR products.

Consumption
Amount to be added up to 1% by weight.
Product information

Triflex UltraCleaner

Triflex UltraCleaner

Triflex UltraCleaner is used as a universal cleaning and degreasing agent for treating Triflex surfaces.

Consumption
Depending on the degree of soiling and the substrate
Product information

Specifications & CAD details

Specifications

Instructions for use

Thumbnail
Mill out and grind the surface.
1/7
Thumbnail
Cut stops 10 cm to the left and right of the crack.
2/7
Thumbnail
The surface is primed and stops and cracks are sealed.
3/7
Thumbnail
Apply waterproofing resin Triflex ProPark and lay Triflex Special Fleece
4/7
Thumbnail
Apply a coating of Triflex ProPark wet-on-wet.
5/7
Thumbnail
Apply the Triflex Cryl M 264 wearing layer so it is flush with the surface.
6/7
Thumbnail
Done! The surface is suitable for vehicle traffic again after 3 hours.
7/7

Exceptional quality. Exceptional conformity.

Triflex products give you complete peace of mind whatever the application. We regard continuous
internal and external quality controls in production and extensive field tests prior to market launch as essential.

Tests and certificates

How may we help you?

We are here to help. Call us if you have any questions about our products and system solutions.