The parking garage renovation will be a successful project thanks to the Triflex system. We are specialists in renovation, waterproofing, and marking, and we offer an exceptional system. With us, you’ll find Europe’s leading specialist in liquid waterproofing and cold-applied coatings. The parking garage renovation is optimally planned at our production facility in Minden, Westphalia, and all necessary customized solutions are shipped from there. Our shipments of PMMA-based solutions are not limited to Germany and Europe but are distributed worldwide. The PMMA-based solutions comply with DIN 18532, the Flat Roof Guideline, and the “Guideline of the German Committee for Reinforced Concrete.” In addition, these liquid plastics can be used as a design principle in DIN 1045 for concrete components subject to de-icing salt exposure, vehicle traffic, and structural stability requirements. Depending on product properties, they comply with the surface protection systems OS 8, OS 11b, OS 10, and OS 13; their safety is verified by general building inspection test certificates (abP). By incorporating quartz sand into the surface sealant, slip resistance up to R 13 V 10 can be achieved. The fire behavior of the waterproofing and coating systems complies with classes Cfl-s1 and Bfl-s1 according to DIN EN 13501-1 (classified as flame-retardant according to DIN 4102). A Triflex waterproofing system has an expected service life of 25 years according to ETAG 005.

Parking garage renovation can only be a complete success through reliability, a commitment to service, and innovation. That is why these values guide us every day in our collaboration with our customers. The perfect synergy between skilled workers, planners, employees, and our systems leads to success and will win you over. We want to satisfy not only you but also ourselves, and we do our very best every day to achieve this. Triflex systems provide impressive, long-lasting protection for building structures against moisture and contamination. Large-scale projects, such as parking garage renovations, must be executed perfectly and with a long-term perspective so that the buildings can withstand constant stress and do not quickly turn back into major construction sites. The construction time is reduced with our solutions because the liquid polymers cure quickly. Compared to EP or PUR products, the resin cures significantly faster. Cost-effectiveness is therefore very high due to the short closure periods for the buildings being renovated. In addition, we can provide you with planning and application reliability even under a wide range of weather conditions and throughout all seasons. Parking garage renovation with Triflex also offers the advantage that our materials are highly elastic and dynamically bridge cracks. We work with you to develop a reliable and durable solution.

We have extensive experience in the renovation of challenging parking garages. Parking garages are generally subjected to severe mechanical and chemical stresses. The surface is heavily loaded by vehicles and is further compromised by rainwater, condensation, road salt, fuels, and oils, among other factors. Ramps, spiral ramps, access roads, joints, and other details are particularly vulnerable. In these areas, moisture and contaminants can easily penetrate the building structure and cause, for example, concrete spalling. This compromises the safety of drivers and pedestrians, making parking garage renovation unavoidable. Triflex addresses this problem and meets the highest standards for safety, cleanliness, and cost-effectiveness. We want to support you with our experience and complete the parking garage renovation quickly and to the highest standards for the long term.