Preco Cryl Roller-Applied Plastic 2K is used as a textured and non-slip coating for surfaces and cycle paths, including those which run alongside the main flow of traffic.
Preco Cryl Roller-Applied Plastic 2K is used as a textured and non-slip coating for surfaces and cycle paths, including those which run alongside the main flow of traffic. The completely resilient and non-slip surface cures in less than twenty minutes. It can be applied quickly and easily with a rubber blade or a wool roller. Due to the coarse filling materials contained in the material, it is not necessary to dress the surfaces with anti-skid aggregate.
Preco Cryl Roller-Applied Plastic 2K is suitable for coating cycle paths on bituminous surfaces as well as concrete substrates (with Triflex Than Primer L 1K).
System set-up
- Triflex Than Primer L 1K – for sealing the concrete substrate and ensuring substrate adhesion
- Preco Cryl Roller-Applied Plastic 2K – continuous surface coating in layer thicknesses of approx. 1.0 to 1.2 mm
Material consumption
Preco Cryl Roller-Applied Plastic 2K, density approx. 1.7 g/cm³
Required volume approx. 2.00 kg/m² with a layer thickness of approx. 1.2 mm.
Calculation formula: Surface width (m) x surface length (m) x volume (kg/m²) = volume required for the surface (kg)
Colours
- 3009 Oxide red
- 3013 Tomato red
- 3020 Traffic red
- 5017 Traffic blue
- 6024 Traffic green
- 7043 Traffic grey B
- 9005 Black
- 9010 White