Triflex BWS: waterproofing underneath other mineral coverings
Triflex BWS is a waterproofing system specially developed for other coverings. The waterproofing reliably protects the structure against permanent load from heavy coverings and penetrating moisture.
Thanks to its low build-up height of just a few millimetres and its ability to waterproof a wide range of different surfaces homogeneously and seamlessly, the waterproofing system Triflex BWS is ideal for complicated structures. It can accommodate subsequent surfaces of fixed bonded or loosely applied coverings, such as light wooden decking or the heavy ashlars used in monument preservation.
System build-up Triflex BWS
Primer
Triflex Cryl Primer 222
Triflex Cryl Primer 222 is used as a primer on asphalt for Triflex systems with a PMMA resin base.
Triflex Cryl Primer 276
Triflex Cryl Primer 276 is used as a primer on absorbent substrates, such as concrete or screed, for Triflex systems with a PMMA base.
Triflex Glass Primer
Triflex Glass Primer is used as a primer on unpolished glass substrates under various Triflex systems.
Triflex Metal Primer
Triflex Metal Primer is used as a primer on various metals and rusty substrates.
Triflex Pox R 100
Triflex Pox R 100 is used as a primer and for the production of:
- Scraper fillers
- Thin-layer mortar coverings
- Thick-layer mortar coverings
- Repair mortar
Waterproofing
Triflex Special Fleece
Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.
Triflex ProTerra
Triflex ProTerra is a high-quality and durable surface waterproofing product for use on balconies, terraces and covered walks in both new buildings and refurbishments. Triflex ProTerra can be used with the Triflex BTS-P, Triflex BWS and Triflex Stone Design systems.
Wearing layer (loose/fixed other covering)
Triflex ProTerra
Triflex ProTerra is a high-quality and durable surface waterproofing product for use on balconies, terraces and covered walks in both new buildings and refurbishments. Triflex ProTerra can be used with the Triflex BTS-P, Triflex BWS and Triflex Stone Design systems.
Quartz sand 0.7-1.2 mm
Details can be found in the planning documents.
Other/optional system components
Triflex ProDetail
Triflex ProDetail is used for details on flat roofs, balconies, terraces and covered walks as well as parking decks.
Triflex Cryl Level 215+
Triflex Cryl Level 215+ is a fast-curing, heavy-duty repair mortar for repairs to screeds and improvement work in exterior areas for thicknesses of 10 mm to 50 mm under waterproofing and coating systems.
Triflex Cryl RS 240
Triflex Cryl RS 240 is a fast-curing, heavy-duty repair mortar for repairs to screeds and improvement work in exterior areas for thicknesses of 5 mm to 50 mm.
Triflex Cryl Paste
Triflex Cryl Paste is used to level out any unevenness in the substrate and any fleece overlaps or depressions in Triflex systems.
Triflex ProFloor
Triflex ProFloor is used as a high-quality and durable coating for heavy-duty surfaces in the Triflex BTS-P, Triflex BFS and Triflex TSS balcony systems.
Triflex Cleaner
Triflex Cleaner is used with all Triflex PMMA, EP, PU and PUA products. It is used to pre-treat substrates and to degrease metal when overcoating or if work is interrupted. In addition, soiled tools can be cleaned with Triflex Cleaner.
Triflex Support Strip
Triflex Support Strip is used as a support layer for the creation of a loop in settlement joints.
PE round sealing band
Details can be found in the planning documents.
Triflex Balcony Edge Finishing Profile
Edge profile
Triflex UltraCleaner
Triflex UltraCleaner is used as a universal cleaning and degreasing agent for treating Triflex surfaces.
Triflex P 250 balcony edge finishing profile
The Triflex P 250 balcony edge finishing profile is used as an edge finishing profile with the Triflex BTS-P, Triflex BFS and Triflex BWS systems.
Specifications & System drawings
Application steps
Exceptional quality. Exceptional conformity.
Triflex products give you complete peace of mind whatever the application. We regard continuous internal and external quality controls in production and extensive field tests prior to market launch as essential.
