Triflex BFS: coating balconies, terraces and walkways above unused spaces
Triflex BFS is a thick-layer self-levelling mortar developed specially for balconies and walkways, which permanently withstands high mechanical and chemical loads. This coating helps to maintain the building structure on a lasting basis. Triflex BFS is applied to projecting paving and surfaces above non-inhabited spaces.
The resin used for Triflex BFS cures in less than an hour. All of the working phases involved in the complete coating of a balcony, from priming through coating to finishing, can be completed in a single day. Disruptions to residents are kept to a minimum, and even walkways can be used after extremely short closure times.
System build-up Triflex BFS
Primer
Triflex Cryl Primer 222
Triflex Cryl Primer 222 is used as a primer on asphalt for Triflex systems with a PMMA resin base.
Triflex Cryl Primer 276
Triflex Cryl Primer 276 is used as a primer on absorbent substrates, such as concrete or screed, for Triflex systems with a PMMA base.
Triflex Glass Primer
Triflex Glass Primer is used as a primer on unpolished glass substrates under various Triflex systems.
Triflex Metal Primer
Triflex Metal Primer is used as a primer on various metals and rusty substrates.
Triflex Pox R 100
Triflex Pox R 100 is used as a primer and for the production of:
- Scraper fillers
- Thin-layer mortar coverings
- Thick-layer mortar coverings
- Repair mortar
Coating
Triflex ProFloor
Triflex ProFloor is used as a high-quality and durable coating for heavy-duty surfaces in the Triflex BTS-P, Triflex BFS and Triflex TSS balcony systems.
Triflex ProFloor S1
Triflex ProFloor S1 is used as a high-quality and durable flame-retardant coating in the Triflex BTS-P (S1), Triflex BFS (S1) and Triflex TSS (S1) system versions.
Triflex ProFloor RS 2K
Triflex ProFloor RS 2K is used as a high-quality and durable coating for heavy-duty surfaces in the Triflex BTS-P, Triflex BFS and Triflex TSS systems.
Finish
Triflex Cryl Finish 205
Triflex Cryl Finish 205 is used as a finish on dressed and undressed Triflex PMMA systems to increase chemical and mechanical resistance.
Triflex Cryl Finish S1
Triflex Cryl Finish S1 is used as a finish on Triflex BTS-P (S1), Triflex BFS (S1) and Triflex TSS (S1) systems.
Triflex Micro Chips
Triflex Micro Chips are used for applying “Chips Design” surface designs with Triflex systems. They are a decorative dressing material with an acrylate copolymer base.
Triflex Colour Mix
Triflex Colour Mix is used for the surface treatment of Triflex systems.
Triflex Cryl Finish Satin
Triflex Cryl Finish Satin is used as a finish on Triflex PMMA systems with full dressing to increase chemical and mechanical resistance
Quartz sand 0.7-1.2 mm
Details can be found in the planning documents.
Quarzsand 0,2-0,6 mm
Detailinformationen sind den Planungsunterlagen zu entnehmen.
Other/optional system components
Triflex ProDetail
Triflex ProDetail is used for details on flat roofs, balconies, terraces and covered walks as well as parking decks.
Triflex Special Fleece
Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.
Triflex Cryl Level 215+
Triflex Cryl Level 215+ is a fast-curing, heavy-duty repair mortar for repairs to screeds and improvement work in exterior areas for thicknesses of 10 mm to 50 mm under waterproofing and coating systems.
Triflex Cryl RS 240
Triflex Cryl RS 240 is a fast-curing, heavy-duty repair mortar for repairs to screeds and improvement work in exterior areas for thicknesses of 5 mm to 50 mm.
Triflex Cryl Paste
Triflex Cryl Paste is used to level out any unevenness in the substrate and any fleece overlaps or depressions in Triflex systems.
Triflex Cleaner
Triflex Cleaner is used with all Triflex PMMA, EP, PU and PUA products. It is used to pre-treat substrates and to degrease metal when overcoating or if work is interrupted. In addition, soiled tools can be cleaned with Triflex Cleaner.
Triflex Support Strip
Triflex Support Strip is used as a support layer for the creation of a loop in settlement joints.
PE round sealing band
Details can be found in the planning documents.
Triflex Balcony Edge Finishing Profile
Edge profile
Triflex Liquid Thixo
Triflex Liquid Thixo is used as a thickening agent in Triflex PMMA products to allow the coating of vertical surfaces. It is not suitable for EP or PUR products.
Triflex UltraCleaner
Triflex UltraCleaner is used as a universal cleaning and degreasing agent for treating Triflex surfaces.
Triflex P 250 balcony edge finishing profile
The Triflex P 250 balcony edge finishing profile is used as an edge finishing profile with the Triflex BTS-P, Triflex BFS and Triflex BWS systems.
Specifications & System drawings
Application steps
Exceptional quality. Exceptional conformity.
Triflex products give you complete peace of mind whatever the application. We regard continuous internal and external quality controls in production and extensive field tests prior to market launch as essential.
