00 81L 1122PPPP090 000001 01AUSSCHREIBEN.DE - Triflex English 07.03.22 000002 02AUSSCHREIBEN.DE 000003 08_ Euro 000004 1101 N Lot 000005 12Triflex BFS - Balcony coating system 000006 20 000007 26 Triflex BFS 000008 26 Balcony coating system with Triflex ProFloor 000009 26 000010 26 000011 2611BConstruction project: '...' 000012 2612BArchitect/client: '...' 000013 26 000014 26 Preliminary remarks: 000015 26 000016 26 Work is carried out using products from the Minden- 000017 26 based company Triflex GmbH & Co. KG. 000018 26 000019 26 Compliance with all applicable guidelines is taken into 000020 26 account and required for the different recommended 000021 26 system build-ups using Triflex products. 000022 26 000023 26 The waterproofing systems within the system build-up 000024 26 with Triflex ProDetail (junctions, details) are covered 000025 26 by an European Technical Approval (ETA) issued by the 000026 26 German approval body for non-regulated construction 000027 26 products and types of construction, the Deutsches 000028 26 Institut fr Bautechnik (DIBt), and meet the 000029 26 requirements of the EUlsquo;s Construction Products 000030 26 Directive (CE mark) according to ETAG No. 005 in the 000031 26 highest usage category. A General Building Supervisory 000032 26 Authority Test Certificate (PG-FLK) certifies the 000033 26 suitability for use of the detail waterproofing within 000034 26 the system build-up as structure waterproofing on 000035 26 surfaces with an inclination of up to 90ø as per MVV TB 000036 26 C 3.28. 000037 26 Use of the system as flame-retardant variant S1 is also 000038 26 certified by a General Building Supervisory Authority 000039 26 Test Certificate. 000040 26 The system build-up meets the requirements of Class OS 000041 26 8 under DIN V 18026 and the German Committee on 000042 26 Reinforced Concretelsquo;s guidelines for the 000043 26 protection and repair of concrete components OS 8 of 000044 26 the DAfStb Rili SIB 2005 (Repair Guideline). 000045 26 000046 26 Before the contract is awarded, contractors must prove 000047 26 that they have been trained in the application of 000048 26 Triflex products. Otherwise, instruction by a trainer 000049 26 shall be provided on-site. 000050 26 000051 26 The quantities contained herein shall be checked on the 000052 26 building site. 000053 26 000054 26 Billing shall be based on measurements conducted 000055 26 jointly by the contractor and client. 000056 26 000057 26 The coating system must be applied so as to prevent 000058 26 rainwater from penetrating the system structure in the 000059 26 event that work is interrupted. 000060 26 000061 26 For disposal of rubble, the cartage and landfill costs 000062 26 shall be included in the individual prices or itemised 000063 26 separately. 000064 26 000065 26 Concerns about prior work performed by other 000066 26 contractors shall be communicated to the client in 000067 26 writing immediately, ideally before work begins. 000068 26 000069 26 It is recommended that the bidder view the work site 000070 26 prior to submitting a tender. 000071 26 000072 26 If alterations or special work not included herein 000073 26 become necessary after work has commenced, detailed 000074 26 notification shall be given before going ahead with 000075 26 such alterations or special work, and the work shall 000076 26 subsequently be billed separately. 000077 26 000078 26 Unless explicitly stated otherwise, all work shall be 000079 26 regarded as a comprehensive turnkey service, including 000080 26 the supply of all required materials and ancillary 000081 26 services. 000082 26 000083 26 The contract comprises the following components: 000084 26 ú Specifications 000085 26 ú System description and manufacturerlsquo;s product 000086 26 information 000087 26 ú DIN 18202 - Tolerances in building construction 000088 26 ú DIN 18531 - Waterproofing of roofs, balconies, 000089 26 loggias and walkways 000090 26 ú DIN V 18026 Surface protection systems for concrete 000091 26 products according to DIN EN 1504-2 000092 26 ú DAfStb directive (Repair Guideline) 000093 26 ú Building code regulations 000094 26 ú Accident prevention regulations 000095 26 ú German Construction Contract Procedures (VOB), Part B 000096 26 in the versions valid at the time of conclusion of the 000097 26 contract. 000098 26 000099 26 The system build-up must be adapted by the expert 000100 26 planner to meet the project-specific requirements. 000101 26 Detailed tender texts must be created by the planner on 000102 26 his or her own authority. There is no specific project 000103 26 consultation associated with the issue of these draft 000104 26 specifications. The preparation of drafts is a non- 000105 26 obligatory service provided by Triflex. Any legal 000106 26 claims from this service are excluded. 000107 26 000108 26 System and product characteristics: 000109 26 ú Waterproof thick-layer system based entirely on 000110 26 polymethyl methacrylate (PMMA) base 000111 26 ú Joints and details as fleece reinforced waterproofing 000112 26 ú Withstands high mechanical loads 000113 26 ú Seamless 000114 26 ú Cold-applied 000115 26 ú Fast-curing 000116 26 ú Solvent-free 000117 26 ú Full-surface adhesion on a multitude of substrates 000118 26 ú Self-levelling 000119 26 ú Weather-resistant (UV, IR etc.) 000120 26 ú Chemical-resistant 000121 26 ú Structurally crack-bridging 000122 26 ú Conditions for use as per manufacturerlsquo;s system 000123 26 and product descriptions (e.g. minimum application 000124 26 temperature 0 øC substrate moisture max. substrate 000125 26 moisture 6 % by weight, surface temperature min. 3 øC 000126 26 above dew point) 000127 26 ú Coating tested according to DIN EN 1504 000128 26 ú Complies with DIN 18531-5, Annex A (OS 8) 000129 26 ú Triflex BFS version S1 is flame-retardant (B1 000130 26 according to DIN 4102 and Class Bfl-s1 according to DIN 000131 26 EN 13501- 1) 000132 26 000133 26 For detail waterproofing the following also applies: 000134 26 ú Root- and rhizome-resistant according to FLL 000135 26 standards 000136 26 ú Dynamic crack-bridging properties 000137 26 ú Crack-bridging up to 3.0 mm based on PG-FLK 000138 26 ú Fire classification according to EN 13501-5: Class 000139 26 BROOF(t1), BROOF(t2), BROOF(t3), BROOF(t4) 000140 26 ú Fire classification according to EN 13501-1: Class E 000141 26 ú European Technical Approval with CE mark in the 000142 26 highest usage categories (W3, M and S, P1 to P4, S1 to 000143 26 S4, TL4, TH4) 000144 26 000145 26 000146 26 Last updated: 02/2022 000147 110101 N Section 000148 12General 000149 2101010001 NNN psch 000150 25Building site preparation 000151 26 Building site preparation 000152 310101 000153 110102 N Section 000154 12Structure and substrate inspection 000155 2101020001 NNN psch 000156 25Cavities 000157 26 Checking for cavities by tapping the existing surfaces 000158 26 with a hammer, and marking any areas that sound hollow. 000159 2101020002 NNN psch 000160 25Moisture content 000161 26 Determining and recording the moisture content of the 000162 26 existing concrete substrate using a suitable gauge 000163 26 (e.g. a CM device). 000164 2101020003 NNN psch 000165 25Evenness and gradient 000166 26 Testing the evenness and gradient of the existing 000167 26 substrate. 000168 2101020004 NNN psch 000169 25Adhesive tensile strength 000170 26 Determining and recording the specified adhesive 000171 26 tensile strength of the existing substrate using a 000172 26 suitable gauge (e.g. a Herion unit). 000173 310102 000174 110103 N Section 000175 12Substrate pre-treatment 000176 20 000177 26 See Triflex BTS-P system description, Substrate pre- 000178 26 treatment table. 000179 26 Triflex BTS-P version S1 (flame-retardant) is proofed 000180 26 on the surface of solid mineral substrates with a raw 000181 26 density >1,350 kg/mü (e.g. concrete, screed and 000182 26 lightweight concrete) and on the slope grout Triflex 000183 26 Cryl Level 215. 000184 2101030001 NNN mı 000185 25Grinding 000186 26 Preparation of the substrate by grinding with suitable 000187 26 abrasive tools, incl. cleaning, acknowledgement of 000188 26 delivery, off-site transportation and proper disposal 000189 26 of any rubble. 000190 2101030002 NNN mı 000191 25Milling 000192 26 Removal of any contaminated surfaces on the 000193 26 concrete/screed using a suitable milling machine of 000194 26 approx. 5 mm in depth in order to ensure the adhesive 000195 26 property and soundness of the substrate incl. 000196 26 acknowledgement of delivery, off-site transportation 000197 26 and proper disposal of the milled material. 000198 310103 000199 110104 N Section 000200 12Triflex Primer 000201 20 000202 26 See Triflex BFS system description, Substrate pre- 000203 26 treatment table. 000204 2101040001 NNN mı 000205 25Priming of asphalt 000206 26 Priming with Triflex Cryl Primer 222. 000207 26 Consumption: at least 0.40 kg/m2 000208 26 Application according to the material 000209 26 manufacturerlsquo;s technical guidelines. Adhesion to 000210 26 the substrate must be checked on a case-by-case basis. 000211 2101040002 NNN mı 000212 25Priming of concrete 000213 26 e.g. concrete, screed, tiles, wood, lightweight 000214 26 concrete, plaster/masonry. 000215 26 Priming with Triflex Cryl Primer 276. 000216 26 Consumption: at least 0.40 kg/m2 000217 26 Application according to the material 000218 26 manufacturerlsquo;s technical guidelines. Adhesion to 000219 26 the substrate must be checked on a case-by-case basis. 000220 2101040003 NNN mı X 000221 25Priming of composite thermal insulation systems 000222 26 e.g. on composite thermal insulation systems, resin- 000223 26 modified mortar. 000224 26 Priming with Triflex Pox R 100 incl. dressing with a 000225 26 surplus of quartz sand, size 0.2-0.6 mm. Removing any 000226 26 surplus after curing. 000227 2611BJunction height: '.........' cm 000228 26 Consumption of Triflex Pox R 100: at least 0.30 kg/mı 000229 26 Consumption of quartz sand 0.2-0.6 mm: at least 2.00 000230 26 kg/mı 000231 26 Application according to the material 000232 26 manufacturerlsquo;s technical guidelines. Adhesion to 000233 26 the substrate must be checked on a case-by-case basis. 000234 2101040004 NNN mı 000235 25Priming of glass 000236 26 Priming with Triflex Glass Primer, incl. pre-cleaning 000237 26 of the surface with Triflex Glass Cleaner. 000238 26 Consumption of Triflex Glass Cleaner: at least 0.05 000239 26 l/mı 000240 26 Consumption of Triflex Glass Primer: approx. 0.05 l/mı 000241 26 Application according to the material 000242 26 manufacturerlsquo;s technical guidelines. Adhesion to 000243 26 the substrate must be checked on a case-by-case basis. 000244 2101040005 NNN mı 000245 25Priming of metal 000246 26 e.g. stainless steel, steel and zinc. 000247 26 Priming with Triflex Metal Primer, incl. pre-cleaning 000248 26 of the surface with Triflex Cleaner. 000249 26 Consumption of Triflex Cleaner: at least 0.20 l/mı 000250 26 Consumption of Triflex Metal Primer: approx. 0.08 l/mı 000251 26 Application according to the material 000252 26 manufacturerlsquo;s technical guidelines. Adhesion to 000253 26 the substrate must be checked on a case-by-case basis. 000254 310104 000255 110105 N Section 000256 12Triflex repairs 000257 2101050001 NNN mı 000258 25Grouting 000259 26 e.g. in the event of shrinkage cracks, small areas of 000260 26 damage and uneven areas. 000261 26 Grouting and filling in with Triflex Cryl Paste. 000262 26 Consumption: approx. 1.40 kg/mı per mm layer thickness 000263 26 Application according to the material 000264 26 manufacturerlsquo;s technical guidelines. 000265 2101050002 NNN mı 000266 25Levelling out 000267 26 e.g. in the event of larger areas of damage. 000268 26 Levelling out and filling in with Triflex Cryl RS 240. 000269 26 Consumption: approx. 2.20 kg/mı per mm layer thickness 000270 26 Application according to the material 000271 26 manufacturerlsquo;s technical guidelines. 000272 2101050003 NNN mı X 000273 25Scratch coat, mineral substrate or asphalt 000274 26 Repairing defective spots on the existing mineral 000275 26 substrate or on asphalt using a scratch coat with a 000276 26 Triflex ProFloor base. 000277 26 Triflex ProFloor scratch coat made from 33 kg Triflex 000278 26 ProFloor with the addition of up to 10 kg quartz sand 000279 26 (0.2-0.6 mm), grey finish. 000280 2611BAverage layer thickness: '.........' 000281 26 Consumption: at least 2.00 kg/mı per mm layer thickness 000282 26 Application according to the material 000283 26 manufacturerlsquo;s technical guidelines. 000284 2101050004 NNN mı X 000285 25Gradient creation 000286 26 Creation of a sufficient gradient using Triflex Cryl 000287 26 Level 215. 000288 2611BAverage thickness: '.........' mm 000289 26 Consumption: approx. 2.20 kg/mı per mm layer thickness 000290 26 Application according to the material 000291 26 manufacturerlsquo;s technical guidelines. 000292 310105 000293 110106 N Section 000294 12Triflex detail waterproofing 000295 20 000296 26 Creation of detail waterproofing with Triflex ProDetail 000297 26 incl. Triflex Special Fleece. The Triflex ProDetail 000298 26 waterproofing system has been awarded ETA approval (ETA 000299 26 No. 06/0269) with CE mark in the highest usage 000300 26 categories W3, M and S, P1 to P4, S1 to S4, TL4, TH4, 000301 26 BROOF(t1), BROOF(t2), BROOF(t3), BROOF(t4). 000302 26 Test reports certify the root resistance according to 000303 26 FLL standards and resistance to hailstorm according to 000304 26 DIN EN 13583 for hard and flexible substrates. 000305 2101060001 NNN m X 000306 25Wall junction 000307 26 Waterproofing of the wall junction with Triflex 000308 26 ProDetail incl. Triflex Special Fleece. 000309 2611BTriflex Special Fleece strip width: '.........' cm 000310 26 Consumption of Triflex ProDetail: at least 3.00 kg/mı 000311 26 Application according to the material 000312 26 manufacturerlsquo;s technical guidelines. 000313 26 (See Triflex system drawing BFS-2303) 000314 2101060002 NNN m X 000315 25Door sill 000316 26 Waterproofing of the door sill with Triflex ProDetail 000317 26 incl. Triflex Special Fleece. 000318 2611BTriflex Special Fleece strip width: '.........' cm 000319 26 Consumption of Triflex ProDetail: at least 3.00 kg/mı 000320 26 Application according to the material 000321 26 manufacturerlsquo;s technical guidelines. 000322 26 (Corresponds to Triflex system drawing BFS-2303) 000323 2101060003 NNN Stk X 000324 25Gully 000325 26 Waterproofing of the gully with Triflex ProDetail incl. 000326 26 Triflex Special Fleece. 000327 2611BTriflex Special Fleece strip width: '.........' cm, 000328 2612Bd = '.........' cm 000329 26 Consumption of Triflex ProDetail: at least 3.00 kg/mı 000330 26 Application according to the material 000331 26 manufacturerlsquo;s technical guidelines. 000332 26 (See Triflex system drawing BFS-2305) 000333 2101060004 NNN m X 000334 25Gutter 000335 26 Waterproofing of the gutter inlet with Triflex 000336 26 ProDetail incl. Triflex Special Fleece. 000337 2611BTriflex Special Fleece strip width: '.........' cm 000338 26 Consumption of Triflex ProDetail: at least 3.00 kg/mı 000339 26 Application according to the material 000340 26 manufacturerlsquo;s technical guidelines. 000341 26 (Corresponds to Triflex system drawing BFS-2305) 000342 2101060005 NNN Stk X 000343 25Settlement joint 000344 26 Waterproofing of the settlement joint with Triflex 000345 26 ProDetail incl. Triflex Special Fleece. 000346 2611BTriflex Special Fleece strip width: '.........' cm, 000347 2612Bd = '.........' cm 000348 26 Consumption of Triflex ProDetail: at least 3.00 kg/mı 000349 26 Application according to the material 000350 26 manufacturerlsquo;s technical guidelines. 000351 26 (See Triflex system drawing BFS-2304) 000352 2101060006 NNN Stk X 000353 25Penetration 000354 26 Waterproofing of the penetration with Triflex ProDetail 000355 26 incl. Triflex Special Fleece. 000356 2611BTriflex Special Fleece strip width: '.........' cm, 000357 2612Bd = '.........' cm 000358 26 Consumption of Triflex ProDetail: at least 3.00 kg/mı 000359 26 Application according to the material 000360 26 manufacturerlsquo;s technical guidelines. 000361 26 (See Triflex system drawing BFS-2304) 000362 2101060007 NNN m X 000363 25Leading edge with bracket mounted gutter 000364 26 Waterproofing of the leading edge with Triflex 000365 26 ProDetail incl. Triflex Special Fleece. 000366 2611BTriflex Special Fleece strip width: '.........' cm 000367 26 Consumption of Triflex ProDetail: at least 3.00 kg/mı 000368 26 Application according to the material 000369 26 manufacturerlsquo;s technical guidelines. 000370 26 (See Triflex system drawing BFS-2306) 000371 2101060008 NNN m X 000372 25Leading edge with eaves flashing 000373 26 Waterproofing of the leading edge with Triflex 000374 26 ProDetail incl. Triflex Special Fleece. 000375 2611BTriflex Special Fleece strip width: '.........' cm. 000376 26 Consumption of ProDetail: at least 3.00 kg/mı 000377 26 Application according to the material 000378 26 manufacturerlsquo;s technical guidelines. 000379 26 (Corresponds to Triflex system drawing BFS-2306) 000380 2101060009 NNN m X 000381 25Leading edge with edge finishing profile 000382 26 Installation and bonding of the Triflex balcony edge 000383 26 finishing profile with Triflex Cryl Paste. 000384 26 Consumption of Triflex Cryl Paste: approx. 1.40 kg/mı 000385 26 per mm layer thickness 000386 26 Waterproofing of the leading edge with Triflex 000387 26 ProDetail incl. Triflex Special Fleece. 000388 2611BTriflex Special Fleece strip width: '.........' cm 000389 26 Consumption of Triflex ProDetail: at least 3.00 kg/mı 000390 26 Application according to the material 000391 26 manufacturerlsquo;s technical guidelines. 000392 26 (See Triflex system drawing BFS-2307) 000393 2101060010 NNN m X 000394 25Leading edge with edge finishing profile P 250 000395 26 Installation and bonding of the Triflex balcony edge 000396 26 finishing profile P 250 with Triflex Cryl Paste. 000397 26 Consumption of Triflex Cryl Paste: approx. 1.40 kg/mı 000398 26 per mm layer thickness 000399 26 Waterproofing of the leading edge with Triflex 000400 26 ProDetail incl. Triflex Special Fleece. 000401 2611BTriflex Special Fleece strip width: '.........' cm 000402 26 Consumption of Triflex ProDetail: at least 3.00 kg/mı 000403 26 Application according to the material 000404 26 manufacturerlsquo;s technical guidelines. 000405 26 (Corresponds to Triflex system drawing BFS-2307) 000406 310106 000407 110107 N Section 000408 12Triflex joint waterproofing 000409 20 000410 26 Creation of joint waterproofing with Triflex ProDetail 000411 26 incl. Triflex Special Fleece. The Triflex ProDetail 000412 26 waterproofing system has been awarded ETA approval (ETA 000413 26 No. 06/0269) with CE mark in the highest usage 000414 26 categories W3, M and S, P1 to P4, S1 to S4, TL4, TH4, 000415 26 BROOF(t1), BROOF(t2), BROOF(t3), BROOF(t4). 000416 26 Test reports certify the root resistance according to 000417 26 FLL standards and resistance to hailstorm according to 000418 26 DIN EN 13583 for hard and flexible substrates. 000419 2101070001 NNN m X 000420 25Construction joint 000421 26 Waterproofing of the construction joint with Triflex 000422 26 ProDetail incl. Triflex Special Fleece. 000423 2611BTriflex Special Fleece strip width: '.........' cm 000424 26 Consumption of Triflex ProDetail: at least 0.60 kg/m 000425 26 Application according to the material 000426 26 manufacturerlsquo;s technical guidelines. 000427 26 (See Triflex system drawing BFS-2308) 000428 2101070002 NNN m X 000429 25Settlement joint surface 000430 26 Waterproofing of the settlement joint with Triflex 000431 26 ProDetail incl. Triflex Special Fleece. 000432 2611BTwo layers of Triflex Special Fleece, strip width: 000433 2611B'.........' cm 000434 26 Consumption of Triflex ProDetail: at least 1.20 kg/m 000435 26 Application according to the material 000436 26 manufacturerlsquo;s technical guidelines. 000437 26 (See Triflex system drawing BFS-2309) 000438 2101070003 NNN m X 000439 25Settlement joint - wall junction 000440 26 Waterproofing of the settlement joint with Triflex 000441 26 ProDetail incl. Triflex Special Fleece. 000442 2611BTwo layers of Triflex Special Fleece, strip width: 000443 2611B'.........' cm 000444 26 Consumption of Triflex ProDetail: at least 1.20 kg/m 000445 26 Application according to the material 000446 26 manufacturerlsquo;s technical guidelines. 000447 26 (See Triflex system drawing BFS-2310) 000448 310107 000449 110108 N Section 000450 12Triflex surface coating 000451 2101080001 NNN mı 000452 25Surface coating - standard 000453 26 Coating of the surface with Triflex ProFloor. 000454 26 Consumption: at least 4.00 kg/mı 000455 26 Application according to the material 000456 26 manufacturerlsquo;s technical guidelines. 000457 26 (See Triflex system drawing BFS-2301) 000458 2101080002 NNN mı 000459 25Surface coating - version S1 (flame-retardant) 000460 26 Coating of the surface with Triflex ProFloor S1. 000461 26 Consumption: at least 4.00 kg/mı 000462 26 Application according to the material 000463 26 manufacturerlsquo;s technical guidelines. 000464 26 (See Triflex system drawing BFS-2302) 000465 310108 000466 110109 N Section 000467 12Triflex Finish 000468 2101090001 NNN mı X 000469 25"Micro Chips" (R 9) surface - standard 000470 26 Finishing of the surface and details with Triflex Cryl 000471 26 Finish 205, dressing of the surface with Triflex Micro 000472 26 Chips. 000473 2611BColour: '.........' at the discretion of the client. 000474 26 Consumption of Triflex Cryl Finish 205: at least 0.50 000475 26 kg/mı 000476 26 Consumption of Triflex Micro Chips: at least 0.05 kg/mı 000477 26 Application according to the material 000478 26 manufacturerlsquo;s technical guidelines. 000479 26 (Not suitable for the Triflex BFS S1 (flame-retardant) 000480 26 version). 000481 2101090002 NNN mı X 000482 25"Micro Chips" (R 9) surface - version S1 (flame retardant) 000483 26 Finishing of the surface and details with Triflex Cryl 000484 26 Finish S1, dressing of the surface with Triflex Micro 000485 26 Chips. 000486 2611BColour: . '.........' at the discretion of the client. 000487 26 Consumption of Triflex Cryl Finish S1: at least 0.50 000488 26 kg/mı 000489 26 Consumption of Triflex Micro Chips: at least 0.05 kg/mı 000490 26 Application according to the material 000491 26 manufacturerlsquo;s technical guidelines. 000492 2101090003 NNN mı X 000493 25"Colour Design" (R 10) surface 000494 26 Finishing of the surface and details with Triflex Cryl 000495 26 Finish 205, dressing of the surface with Triflex Colour 000496 26 Mix, final finish with Triflex Cryl Finish Satin. 000497 2611BTriflex Colour Design colour: '.........' at the 000498 2611Bdiscretion of the 000499 26 client. 000500 26 Consumption of Triflex Cryl Finish 205: at least 0.50 000501 26 kg/mı 000502 26 Consumption of Triflex Colour Mix: at least 0.80-1.00 000503 26 kg/mı 000504 26 Consumption of Triflex Cryl Finish Satin: at least 0.35 000505 26 kg/mı 000506 26 Application according to the material 000507 26 manufacturerlsquo;s technical guidelines. 000508 26 (Not suitable for the Triflex BFS S1 (flame-retardant) 000509 26 version). 000510 2101090004 NNN mı X 000511 25"Creative Design" (R 9) surface - standard version with Triflex Micro 000512 25Chips 000513 26 Finishing of the surface and details with Triflex Cryl 000514 26 Finish 205 (joint colour). 000515 2611BJoint colour: '.........' at the discretion of the 000516 2611Bclient. 000517 26 Consumption of Triflex Cryl Finish 205: at least 0.50 000518 26 kg/mı 000519 26 Affixing the Triflex Design Sheet. 000520 2612BTile pattern: '.........' at the discretion of the 000521 2612Bclient. 000522 26 Finishing of the surface with Triflex Cryl Finish 205 000523 26 (surface colour), dressing of the surface with Triflex 000524 26 Micro Chips. 000525 2613BSurface colour: '.........' at the discretion of the 000526 2613Bclient. 000527 26 Removal of the bonded sheet once the surface has cured. 000528 26 Consumption of Triflex Cryl Finish 205: at least 0.50 000529 26 kg/mı 000530 26 Consumption of Triflex Micro Chips: at least 0.05 kg/mı 000531 26 Application according to the material 000532 26 manufacturerlsquo;s technical guidelines. 000533 26 (Not suitable for the Triflex BFS S1 (flame-retardant) 000534 26 version). 000535 2101090005 NNN mı X 000536 25"Creative Design" (R 10) surface - standard version with Triflex 000537 25Colour Mix 000538 26 Finishing of the surface and details with Triflex Cryl 000539 26 Finish 205 (joint colour). 000540 2611BJoint colour: '.........' at the discretion of the 000541 2611Bclient. 000542 26 Consumption of Triflex Cryl Finish 205: at least 0.50 000543 26 kg/mı 000544 26 Affixing the Triflex Design Sheet. 000545 2612BTile pattern: '.........' at the discretion of the 000546 2612Bclient. 000547 26 Finishing of the surface with Triflex Cryl Finish 205 000548 26 (surface colour), dressing of the surface with Triflex 000549 26 Colour Mix. 000550 2613BSurface colour: '.........' at the discretion of the 000551 2613Bclient. 000552 26 Removal of the bonded sheet once the surface has cured. 000553 26 Consumption of Triflex Cryl Finish 205: at least 0.50 000554 26 kg/mı 000555 26 Consumption of Triflex Colour Mix: at least 0.80-1.00 000556 26 kg/mı 000557 26 Consumption of final finish with Triflex Cryl Finish 000558 26 Satin: at least 0.35 kg/mı 000559 26 Application according to the material 000560 26 manufacturerlsquo;s technical guidelines. 000561 26 (Not suitable for the Triflex BFS S1 (flame-retardant) 000562 26 version). 000563 2101090006 NNN mı X 000564 25"Dressing, fine" (R 11) surface - standard 000565 26 Finishing of the surface and details with Triflex Cryl 000566 26 Finish 205 with quartz sand dressing, size 0.2-0.6 mm. 000567 2611BColour: '.........' at the discretion of the client. 000568 26 Consumption of Triflex Cryl Finish 205: at least 0.50 000569 26 kg/mı 000570 26 Consumption of quartz sand 0.2-0.6 mm: at least 3.00 000571 26 kg/mı 000572 26 Finishing with Triflex Cryl Finish 205 a second time, 000573 26 dressing of the surface with Triflex Micro Chips. 000574 26 Consumption of Triflex Cryl Finish 205: at least 0.70 000575 26 kg/mı 000576 26 Consumption of Triflex Micro Chips: at least 0.05 kg/mı 000577 26 Application according to the material 000578 26 manufacturerlsquo;s technical guidelines. 000579 26 (Not suitable for the Triflex BFS S1 (flame-retardant) 000580 26 version). 000581 2101090007 NNN mı X 000582 25"Dressing, fine" (R 11) surface - version S1 (flame retardant) 000583 26 Finishing of the surface and details with Triflex Cryl 000584 26 Finish S1 with quartz sand dressing, size 0.2-0.6 mm. 000585 2611BColour: '.........' at the discretion of the client. 000586 26 Consumption of Triflex Cryl Finish S1: at least 0.50 000587 26 kg/mı 000588 26 Consumption of quartz sand 0.2-0.6 mm: at least 3.00 000589 26 kg/mı 000590 26 Finishing with Triflex Cryl Finish S1 a second time, 000591 26 dressing of the surface with Triflex Micro Chips. 000592 26 Consumption of Triflex Cryl Finish S1: at least 0.70 000593 26 kg/mı 000594 26 Consumption of Triflex Micro Chips: at least 0.05 kg/mı 000595 26 Application according to the material 000596 26 manufacturerlsquo;s technical guidelines. 000597 2101090008 NNN mı X 000598 25"Dressing, coarse" (R 12) surface - standard 000599 26 Dressing of the wet Triflex ProFloor wearing layer with 000600 26 quartz sand, size 0.7-1.2 mm. 000601 26 Consumption of quartz sand 0.7-1.2 mm: at least 7.00 000602 26 kg/mı 000603 26 Finishing of the surface and details with Triflex Cryl 000604 26 Finish 205, dressing of the surface with Triflex Micro 000605 26 Chips. 000606 2611BColour: '.........' at the discretion of the client. 000607 26 Consumption of Triflex Cryl Finish 205: at least 0.70 000608 26 kg/mı 000609 26 Consumption of Triflex Micro Chips: at least 0.05 kg/mı 000610 26 Application according to the material 000611 26 manufacturerlsquo;s technical guidelines. 000612 26 (Not suitable for the Triflex BFS S1 (flame-retardant) 000613 26 version). 000614 2101090009 NNN mı X 000615 25"Dressing, coarse" (R 12) surface - version S1 (flame retardant) 000616 26 Dressing of the wet Triflex ProFloor S1 wearing layer 000617 26 with quartz sand, size 0.7-1.2 mm. 000618 26 Consumption of quartz sand 0.7-1.2 mm: at least 7.00 000619 26 kg/mı 000620 26 Finishing of the surface and details with Triflex Cryl 000621 26 Finish S1, dressing of the surface with Triflex Micro 000622 26 Chips. 000623 2611BColour: '.........' at the discretion of the client. 000624 26 Consumption of Triflex Cryl Finish S1: at least 0.70 000625 26 kg/mı 000626 26 Consumption of Triflex Micro Chips: at least 0.05 kg/mı 000627 26 Application according to the material 000628 26 manufacturerlsquo;s technical guidelines. 000629 310109 000630 110110 N Section 000631 12Hourly rates 000632 2101100001 NNN h 000633 25Foreman 000634 26 Hourly rate of a foreman. 000635 2101100002 NNN h 000636 25Skilled trade worker 000637 26 Hourly rate of a skilled trade worker. 000638 2101100003 NNN h 000639 25Assistant 000640 26 Hourly rate of an assistant. 000641 310110 000642 110111 N Section 000643 12Materials 000644 2101110001 NNN kg 000645 25Materials 000646 26 Material consumption upon proof. 000647 310111 000648 110112 N Section 000649 12Disposal 000650 2101120001 NNN psch 000651 25Disposal 000652 26 Disposal of all waste and hazardous waste materials in 000653 26 accordance with the current applicable laws and 000654 26 implementing regulations. 000655 310112 000656 3101 000657 99 00045000658