Triflex Metal Coat - Technical details

Triflex Metal Coat - Technical details

Triflex Metal Coat: corrosion protection for metal

The single-component, aqueous functional coating acts like a protective coat over the roof covering. Scratches and dents are encased by the elastic coating with a high polymer base, so that cracks and scaling cannot occur. Even sensitive areas are protected thanks to the good edge coverage Additional anti-corrosive pigments ensure complete protection against rust.

When used together with the fleece-reinforced liquid applied waterproofing Triflex ProDetail for all metal overlaps and details, the result is reliable long-lasting protection, which is also available in different colours.

System build-up Triflex Metal Coat

Thumbnail
1

Primer

Triflex Glass Primer

Triflex Glas Primer

Triflex Glass Primer is used as a primer on unpolished glass substrates under various Triflex systems.

Consumo
Approx. 0.05 l/m² (50 ml) on a smooth, even surface
Product information

Triflex Metal Primer

Triflex Metal Primer

Triflex Metal Primer is used as a primer on various metals and rusty substrates.

Consumo
Approx. 0.15 l/m²
Product information
2

Coating

Triflex Metal Coat

Triflex Metal Coat

Triflex Metal Coat is used as a surface coating on metal roof structures. It protects against corrosion and extends the service life of the roof.

Consumo
Total volume: approx. 600 to 800 g/m².
Product information
3

Other/optional system components

Triflex ProDetail

Triflex ProDetail

Triflex ProDetail is used for details on flat roofs, balconies, terraces and covered walks as well as parking decks.

Consumo
Min. 3.00kg/m² on a smooth, even surface
Product information

Triflex Special Fleece

Triflex Spezialvlies

Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.

Consumo
/
Product information

Triflex ProFibre

Triflex ProFibre

Triflex ProFibre is used for structurally hard-to-reach details, where it is impossible to use a fleece-reinforced waterproofing system.

Consumo
Min. 3.00 kg/m² on a smooth, even surface
Product information

Triflex Cleaner

Triflex Reiniger

Triflex Cleaner is used with all Triflex PMMA, EP, PU and PUA products. It is used to pre-treat substrates and to degrease metal when overcoating or if work is interrupted. In addition, soiled tools can be cleaned with Triflex Cleaner.

Consumo
Depending on the degree of soiling and the substrate (at least 0.20l/m²)
Product information

PE round sealing band

PE-Rundschnur

Details can be found in the planning documents.

Triflex duct tape

Triflex Steinklebeband

Details can be found in the planning documents.

Triflex UltraCleaner

Triflex UltraCleaner

Triflex UltraCleaner is used as a universal cleaning and degreasing agent for treating Triflex surfaces.

Consumo
Depending on the degree of soiling and the substrate
Product information

Application steps

Thumbnail
Heavily corroded metal substrates and unsound old coatings must be removed.
1/7
Thumbnail
Degrease greasy and oily joint surfaces with Triflex Cleaner.
2/7
Thumbnail
Prime rusty surfaces with Triflex Metal Primer.
3/7
Thumbnail
To increase the expansion capacity, metal element overlaps are taped with Triflex Duct Tape.
4/7
Thumbnail
All details and joints are waterproofed with fleece-reinforced Triflex ProDetail.
5/7
Thumbnail
Triflex Metal Coat is roller- or airless-spray-applied to the entire surface in two coats.
6/7
Thumbnail
The final result is an elastic functional coating that protects against rust and scaling.
7/7

Exceptional quality. Exceptional conformity.

Triflex products give you complete peace of mind whatever the application. We regard continuous internal and external quality controls in production and extensive field tests prior to market launch as essential.

Tests and certificates
Thumbnail
Risanamento di tetto in metallo a Bolzano

How may we help you?

We are here to help. Why not give us a call if you have any questions about our products and system solutions.